Aqua Master Tools | Replaceable Electrode P110 / P160

Aqua Master Tools - P110 & P160 Electrode

With the replaceable electrodes from Aqua Master Tools, you can easily replace the electrode of your P110 or P160 meter. The included instruction manual provides instructions on how to replace the electrode.

Electrode replacement

1. Loosen the thread of the sealing ring of the lower part of the meter firmly.
2. Remove the broken/old electrode by gently pulling on it.
3. Carefully place the new electrode with the recess in the right place so that the connectors fit properly and do not damage the meter or the electrode.
4. Also check that the seal rubber fits properly.
5. Tighten the thread of the sealing ring properly.
6. Calibrate the meter as described in this manual.
7. The meter is now ready for use again.