Aqua Master Tools | P160 Pro Combo Pen | pH, EC, TDS, PPM, Temperature

Aqua Master Tools - P160 Pro Combo Pen

With the Aqua Master Tools P160 Pro Combo Pen, you have a modern, robust all-in-one meter to measure your plant nutrient water and water in pools, jacuzzis and ponds. With this combo meter you can measure pH, EC, PPM, TDS and temperature. With the easy-to-use buttons you can easily switch between the parameters.

A big advantage of the P160 meter is that the EC is calibrated analog, so the calibration fluid does not necessarily have to be 25ºC. EC calibration liquids are very temperature sensitive, but this is not true of pH calibration liquids. The meter is supplied calibrated and including batteries.

This model is supplied in a robust storage case including pH 4.01, pH 7.00 and EC 14.13 calibration liquids so that the meter can be calibrated at a later date. The electrode is easy to replace should it become worn or broken. The electrodes are designed to be stored dry, so you no longer need any storage liquid.

How does the meter work?

1. Remove the protective cap.
2. Clean the electrode carefully with distilled water and dry it.
3. Press the On/Off button so the meter starts up.
4. Insert the meter straight into the solution up to the rim and stir gently. Wait a few seconds for the correct value to appear on the display.
5. Press the Temp/CAL key to switch between temperature and fahrenheit.
6. Press the PH/EC key to switch between pH and EC.
7. Make sure the meter is in EC mode to switch between EC, TDS and PPM. Then press and hold the PH/EC key for more than 5 seconds to switch parameters.
8. After use, rinse the electrode clean with water and press the Power button to turn the meter off.

This package contains:

• 1 x Digital Combo pen P160 Pro
• 1 x Storage box
• 1 x Calibration solutions pH 7.00 25ml
• 1 x Calibration liquids pH 4.01 25ml
• 1 x Calibration liquids EC 14.13 25ml
• 1 x Screwdriver for calibration
• 1 x Manual (NL - EN - DE)

Aqua Master Tools P160 Pro Manual

Specifications

• Measuring range
  • pH: 0.1 ~ 14.0 pH
  • EC: 0.0 ~ 19.9 mS/cm
  • TDS: 0.0 ~ 19.99 PPT
  • PPM: 0.0 ~ 1999 PPM
  • Temp.: 0°C ~ 50°C (32°F ~ 122°F)
• Resolution
  • pH: ± 0.1 pH
  • EC: 0.1 mS/cm
  • TDS: 0.01 PPT
  • PPM: 10 PPM
  • Temp.: 0.1°C (1.0°F)
• Accuracy
  • pH: ± 0.1 pH
  • EC: ± 2% F.S.
  • TDS: ± 2% F.S.
  • PPM: 10 PPM
  • Temperature: ±0.5°C (32°F)
  • Temperature Compensation: 0°C to 50°C (32°F to 122°F)
• PPM Scale
  • 700 PPM
• Calibration
  • pH: 2 point auto 4.0 - 7.0 pH
  • EC manual calibration suitable for any EC buffer
• Features
  • Battery indication & automatic temperature compensation
• Power supply
  • 3 x 1.5 Volt AG-13 button cell batteries (included)
• Auto power off
  • After 8 minutes
• Calibration indication
  • With correct calibration
• Waterproof
  • IP67
• Dimension
  • 220 x 40 x 40 mm
• Weight
  • 102 grams