Digital EC Meter
The DiST (Dissolved Solids tester) testers are widely used for monitoring conductivity in drinking water, water treatment, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquariums, hydroponics and the printing industry.
EC meter with automatic temperature compensation. Equipped with a calibration point (EC 1.41), with an accuracy of 0.2%. Incl. battery and screwdriver for oak.
The Dist4 pocket conductivity meter features a protected LCD display for easy viewing, with a slide switch on the top of the meter. All readings are automatically temperature compensated and the temperature sensor is placed directly next to the conductivity sensor to match the thermal properties of the sensors.
These testers have an amperometric graphite electrode that provides improved repeatability of measurements because they do not oxidize. Oxidation changes both distance and surface area, which directly affects accuracy. DiST non-oxidizing graphite pens can provide an optimal surface area for accurate, reliable results.
The DiST 6 has features such as: a replaceable graphite electrode, adjustable TDS ratio, temperature in °C or °F, automatic temperature compensation (ATC) with adjustable ß, battery level indicator, stability indicator, automatic shutdown and automatic calibration. All in a floating, water-resistant housing. This 3-in-1 tester is unmatched in EC/TDS/temperature measurements.
When calibration is needed, simply immerse the electrode tip in the calibration solution and the meter calibrates automatically!
- Range: 19.99 mS/cm
- Resolution: 0.01 mS/cm
- Accuracy(@20°C): ± 2% F.S.
- Calibration: Manual – 1 point
- Temperature compensation: Automatic, 0 to 50°C
0.0 to 60.0°C
|0.00 to 20.00 mS/cm||0.00 to 10.00 ppt|
0.1°C / 0.1°F
|0.01 mS/cm||0.01 ppt|
|Accuracy(@20°C):||±0.5°C||±2% f.s.||±2% f.s..|
Automatic, at 1 point
|Temperature compensation: ||Automatic, met β=0.0 to 2.4%/ºC|