Mother Nature CO2 Generator Kit (incl. pump)

The Mother Nature CO2 Generator: An innovative solution for plant growth

The need for efficient growth systems undeniable. One of the most important elements affecting plant growth is carbon dioxide (CO2). The Mother Nature CO2 Generator is an innovative solution designed specifically for use in closed growing environments, such as greenhouses or tents, to increase CO2 levels. This article explores the features, benefits and instructions for use of the Mother Nature CO2 Generator.

What is the Mother Nature CO2 Generator?

The Mother Nature CO2 Generator is a complete, self-contained kit designed to increase CO2 concentration in closed growing rooms. This system is ideal for fast-growing crops that require a lot of carbon dioxide. The Generator increases CO2 concentration in the air more than twice compared to the normal atmosphere. Plants growing in an environment with high CO2 concentration develop faster, thrive better at higher temperatures and produce larger and better fruits and flowers.

Key features and benefits:

• Easy installation: The Mother Nature CO2 Generator is easy to install. Just add hot water, connect the bottom pipe to the included air pump and place the top pipe behind a circulating fan.
• Automatic operation: By connecting the air pump to a lighting timer or relay, the unit operates in sync with your lighting regime. When your lights come on, the CO2 Generator is also activated, matching the plant's natural needs.
• Long life: Depending on use, the specially formulated compost and natural bacteria in your Generator will last up to six months. After depleting its contents, the Generator can be easily emptied, cleaned and fitted with a Mother Nature CO2 Refill Pack.
• Increased CO2 levels: The Mother Nature 5L Generator can increase CO2 levels up to 800PPM in a 4' x 4' area.

Instructions for use:

Activation:

Open the lid of the generator and add hot water (not boiling) in the following quantities

• 5 Liter CO2 Generator: add 1.25L of hot water
• 10 Liter CO2 Generator: add 2.5L hot water

Leave the Generator for 24 hours before using it to activate the contents correctly. Replace the lid after adding water.

Options for use:

• Option 1: Connect the AirPump to the lower pipe of the Generator and plug it into a timer or light relay for daylight-only operation. Route the upper pipe to a circulation fan for even CO2 distribution.
• Option 2: Set the timer for pulsed operation: 15 minutes on, 60 minutes off during daylight. This injects high concentrations of CO2 per hour into the growing environment. The timer stays off at night and resumes during the day.
• Option 3: Advanced Method: Use a COP sensor and activate the CO2 Generator when levels fall below 650 PPM (recommended setting).

The Mother Nature CO2 Generator marks a significant advance in technology for agriculture and horticulture by increasing CO2 levels in closed environments.