NutriMatic Digital Second Timer from SMSCOM
With the SMSCOM NutriMatic Digital Second Timer, you have an easy to set timer for your water or nutrient events. This timer is delivered pre-programmed, the cycle of the NutriMatic program can be set to 12 or 18 hours (equal to the light cycle). During the set cycle there will be 19 drip feeds, the duration of the drip feeds can be set with the seconds settings.
After each power interruption the SMSCOM NutriMatic resets and starts again with the set cycle. Do not leave the Nutrimatic under constant current. Light on = Nutrimatic on. Light off = Nutrimatic off!
The setting of the SMSCOM NutriMatic is very simple, plug the NutriMatic into the power point and the digital display will light up. Use the seconds setting to set the number of seconds to drip during the feeding, the last set number of seconds will automatically be stored in the memory. After setting the number of seconds, the display light will turn off and flash with each drip. Set the desired cycle (12 or 18 hours) NOTE: The drip starts when power is applied to the Nutrimatic.
- Control capacity max 2000 Watt
- Mains voltage 230/240V
- Frequency 50Hz
