To measure is to know with the TechGrow sensors
With the TechGrow S-Eco Sensor, you have a CO2 Sensor from Techgrow's budget-friendly Eco line. This sensor helps the controller to keep the CO2 concentration in your space at the right level and has a range of 0 to 2,000 ppm with a response time of 1 minute.
The TechGrow S-Eco Sensor has a built-in light sensor which provides an automatic switch between day and night mode, if it is necessary to run a continuous day program this can be set manually by means of the DIP switch. This sensor is also equipped with an Automatic Baseline Calibration (ABC function), this calibration serves to eliminate the zero drift of the infrared sensor. This function is off by default, this can be enabled via the additional DIP switch.
In addition to the ABC function, the TechGrow S-Eco Sensor also has a manual calibration function which, if required, allows you to calibrate the sensor yourself in fresh air at 400ppm (this calibration menu can only be accessed via a CO2 controller).
Features
- Measures CO2 concentration in a room
- Detects light thanks to built-in light sensor
- Enables automatic switching between day and night mode
- Possibility to manually set the built-in light sensor to day mode for a continuous day program
- Automatic Baseline Calibration (ABC function)
- Manual calibration & test
- Highly accurate measurement by NDIR sensor (non-dispersive infrared sensor)
- Measuring range: 0 - 2,000 ppm
- Adjustable in 10 ppm increments
- Performs a measurement every second
- Response time: 1 minute
- 1 UTP port
- Compatible with T-Nano, T-Micro and T-1 Pro
Specifications
- Measurements: CO2 & light
- PPM range: 0 - 2000 ppm
- Characters on display: No display
- Light sensor: Yes, switchable
- NDIR sensor: Yes
- Measurement frequency: Every second
- Accuracy: 75PPM
- Response time diffusion: 60 seconds
- Warm-up time: 90 seconds
- ABC functionality: Yes
- Power input: From the controller
- Power cable: Via the network
