To measure is to know, to control is better
The TechGrow T-2 Pro CO2 Controller is an extended version of the T-1 Pro CO2 Controller; this controller has an extra tool built in, namely a climate controller. This controller can therefore control the CO2 content as well as the temperature and humidity in your space. This unique combination means that the CO2 is dosed during the day and during the night the excess CO2 and moisture produced by your crop is extracted by your extractor. In addition, the temperature in your space is also controlled.
The external sensor provides an automatic switch between day and night mode and has a measuring range of 300 to 2000 ppm or 300 to 10,000 ppm, which you can set yourself. The TechGrow T-2 Pro CO2 Controller is equipped with, among other things, a built-in dosing retarder, timer, dosing counter and a memory for indicating the minimum and maximum CO2 value in a room. This controller also has a unique calibration function for the perfect adjustment of your extractor. The hard- and software makes the extractor function steplessly and silently. You can easily read the information through the clear and large LCD display, the operation is very simple by means of 1 push button and a rotary knob.
This controller is supplied without Sensor
Properties
- Measures and controls simultaneously CO2, temperature and humidity during the day and night.
- Extracts excess CO2 during the night.
- Displays minimum/maximum values of connected sensor.
- Adjustable from 300 to 2,000 ppm or from 300 to 10,000 ppm.
- Adjustable dosing delay and timer.
- Automatic CO2 dosage counter.
- Dose log of the dosing counter of the last 7 days and display of the total (cumulative) dosing time.
- Pulse dosing for dosed addition of CO2.
- Built-in calibration function for CO2 and temperature.
- Display refreshes every second.
- Indication leds go on at CO2 dosing, light detection and stable climate.
- All set-, hysteresis- and alarm values of the sensor are separately adjustable.
- Quick menus for an easy overview of all settings.
- Suitable for connecting fans up to 5,000 m3/hour (7 A) and up to 10,000 m3/hour (14 A).
- Fan control has 2 setting options: automatic or manual.
- Fan and CO2 relays are separately fused.
- Memory in case of power failure for all settings.
- The controller automatically switches between day and night mode by means of the light sensor.
- Sensor connection with standard network cable (UTP).
- Various sensors are available separately (0-2,000 ppm/0-10,000 ppm).
- Possibility to connect the TechGrow Datalogger (DL-1).
Specifications
- Monitors: CO2, humidity and temperature
- Measures/displays: CO2, humidity and temperature
- PPM range: 300 - 2000 ppm
Optional 300 - 10,000 - CO2 set: 300 to 2000 ppm
- CO2 hysteresis: 10 to 200 ppm (50 ppm recommended)
- Temperature range: 10.0 to 45.0 C.
- Temperature hysteresis: 0.0 to 5.0 C.
- Humidity range: 0 to 100 % RH
- Humidity hysteresis: 10 to 100 % RH
- Day/night detection: Yes
- Light sensor: In CO2 sensor
- Display characters: 4 x 20
- Power input: 100/240 volts 50/60HZ
- CO2 power output: 100 - 220 volts
- Fan power: 5 Amp
- Internal consumption: 3 Watt
- CO2 relay: 8 Amp
- CO2 Fuse: 4 Amp
- Triac: 8 Amp
- Ventilation fuse: 5 Amp
- Mains cable: 3x0,75mm / 1,7m
- Relay switching capacity: 8 Amp
- Relay power: AC 5A
- Compatible sensor: S-4 sensors
