Description
To measure is to know, to control is better
With the TechGrow T-Mini Pro CO2 Controller you have a very complete and compact all-in-one CO2 controller which is easy to operate. The display shows the current values of CO2, temperature and humidity at a glance. The built-in fan in the TechGrow T-Mini Pro CO2 Controller guarantees an optimal air flow which results in fast and accurate measurements.
The TechGrow T-Mini Pro CO2 Controller includes an internal non-dispersive infrared sensor (NDIR) and a light sensor (LDR), the light sensor ensures an automatic switch between day and night mode. In night mode there is no CO2 dosing, for 24/7 dosing you can switch off the light sensor, this keeps the CO2 level constant.
Properties
- Adjustable from 300 to 2000 ppm.
- Built-in CO2, temperature and humidity sensor.
- Built-in light-dependent resistor (LDR)/light sensor.
- Displays current value and minimum/maximum values of CO2, temperature and humidity in the display.
- The display shows an update every second.
- Built-in calibration function to calibrate CO2 sensor in outdoor or indoor environment.
- Built-in fan for optimal air flow. This ensures accurate and fast measurement.
- Indication LEDs for CO2 dosing and stable climate.
- Memory in case of power failure for setpoint and hysteresis.
- The controller automatically switches between day and night mode due to the built-in light sensor.
- Automatic switch-off of the display backlight after 60 seconds.
Specifications
- Controls: CO2
- Measures/displays: CO2, temperature and humidity
- PPM range: 300-2000 ppm
- Day/night detection: Yes
- Light sensor: In the controller
- Display characters: 2 x 16
- Power input: 100/240 volts 50/60 HZ
- CO2 output power: 100 - 220 volts
- Internal consumption: 3 Watt
- CO2 Relay: 8 Amp
- CO2 Fuse: 4 Amp
- Power cord: 3 x 1.5mm
- Cable length: 1.7m
- Relay switching capacity: 8 Amp
- Relay Power: AC 5A
