Description
AUTOMATIC MONITORING WITH SET-POINT ALARMS.
The Milwaukee MC110 PRO Mid Range pH Monitor provides laboratory accuracy with easy-to-read continuous monitoring of pH levels with alarms.
The Milwaukee MC110 is designed to continuously measure pH levels in your reservoir. The MC110 features a user selectable set point, when a value is below or above a red LED flashes to easily alert you to this.
The Milwaukee MC monitors come with a 12V adapter, so you no longer have to worry about broken batteries or dead batteries. Each unit comes with mounting kit, probe, probe holder and starter calibration solution.
DESIGN FEATURES
- Quick and easy to read results with large digital LCD readout.
- Accuracy to ± 0.2 pH with full range from 0 pH to 14 pH.
- Set point range of 3.5 to 7.5 pH with visual alarm activated when reading is higher or lower than set point.
- Comes with full mounting kit including probe holders.
- Laboratory grade probe with double junction, gel filled design for low maintenance.
- Starter calibration 1 x 20 mL of solution M10007B (7.01 pH).
USE AND MAINTENANCE
pH meters usually begin to perform poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensor bulb and the reference junction.
TOP 4 TIPS FROM MILWAUKEE
- Always store the probe upright with the cap full of buffer or storage solution, not water.
- Clean your tester regularly by immersion in cleaning solution.
- After cleaning and/or storing, calibrate before testing to correct for changes in the pH sensor.
- Gently stir the probe into the sample for faster results.
Specifications
- pH Range 0.0 to 14.0 pH;
- pH Resolution 0.1 pH;
- pH Accuracy 0.2 pH;
- Calibration Manual 2 points;
- Adjustment range 3,5 to 7,5 pH;
- Alarm active when exceeding (higher or lower) the set value;
- pH Electrode MA911B / 2 (included).
Links
