Maximizing Growth through the Assistance of Growth Technology EC Standard 1.413
Conductivity, or electric conductivity, is among the major parameters that every hydroponic and soil gardening plant farmer needs to be knowledgeable in. Conductivity is a measure of the ability of the solution to conduct electricity, and it has a direct relationship with the density of dissolved salts. Growers can get precise readings using the Growth Technology EC Standard 1.413 for the right amounts of nutrients required by the plant for its health.
Importance of Periodic Calibration
Correct nutrient management necessitates frequent calibration of EC meters. If a meter reads wrongly, growers may overestimate or underestimate nutrient levels, leading to potential plant deficiency or toxicity. Meter users should find the Growth Technology EC Standard 1.413 useful as a reference point, calibrated at 1.413 mS/cm. Precise calibration guarantees that the conductivity of the nutrient solution is within an appropriate range for plant requirements, thus minimizing stress caused by high conductivity.
Issues to Conversions in ppm Measurements
The majority of growers use meters that are in parts per million (ppm). The milliSiemens to ppm conversion ratio is vastly different between one manufacturer and another, so a standard reference is needed. Growth Technology EC Standard 1.413 facilitates standardization. The following is a quick reference for conversions:
- 1 mS = 500 ppm, hence 1.413 mS = 706.5 ppm
- 1 mS = 666 ppm, hence 1.413 mS = 941.778 ppm
- 1 mS = 700 ppm, hence 1.413 mS = 989.1 ppm
Understanding these differences is crucial for providing regular nutrient supply.
Quality Assurance with Bluelab Meters
Although certain EC meters, such as Bluelab's, must be calibrated less often, checking the accuracy occasionally is always recommended. Faulty readings can also result from flat battery or dirty probes. Using the Growth Technology EC Standard 1.413 ensures your EC meter is accurately calibrated—a invaluable aid to thriving plant growth. Simply fill to sufficient standard for immersion of electrodes and enjoy higher standard plant care with confidence.
*Note that the delivery time is subject to change because of a supplier based in Spain. Estimated delivery time is around 1.5 weeks.*.
