Irrigation system & water treatment

Water and irrigation in plant cultivation

Water is an essential element for all crops. It transports nutrients and allows plants to grow and reproduce. Therefore, in plant cultivation, it is very important to have sufficient water available for the crop. But how much water do plants actually need and how can you ensure that plants get enough water?

How much water do your plants need?

The amount of water plants need depends on several factors. For example, the type of plant plays a role, but also the size of the plant, the size of the pot and the environment in which the plant grows.

How can you make sure plants get enough water?

To ensure that plants get enough water, irrigation is often used in plant cultivation. This involves giving water to plants in a controlled way. This can be done in different ways, such as through drip irrigation, sprinkling or using an irrigation system.

Drip irrigation is a way of irrigation where water is given to the plants through small holes in the hose or tube, drop by drop. This method of irrigation is very efficient and ensures that the water reaches the roots of the plant directly. As a result, no water is lost and the plants receive just enough water.

Sprinkler irrigation is a method of irrigation that uses a sprinkler to deliver water to the plants. This is a less efficient method of irrigation because a lot of water is lost through the sprinkler. In addition, irrigation can cause damage to the plants because the water can damage the leaves.

An irrigation system is a method of irrigation in which water is given to the plants through pipes and hoses. This system can be very efficient because the water gets directly to the roots of the plant. In addition, the irrigation system can be programmed so that the water is given at set times and the plants always get enough water.

Conclusion

Water is an essential element for plants, so in plant cultivation it is very important to ensure that sufficient water is available for the plants. By using irrigation, it can be ensured that the plants get enough water.

...Read more

Water and irrigation in plant cultivation

Water is an essential element for all crops. It transports nutrients and allows plants to grow and reproduce. Therefore, in plant cultivation, it is very important to have sufficient water available for the crop. But how much water do plants actually need and how can you ensure that plants get enough water?

How much water do your plants need?

The amount of water plants need depends on several factors. For example, the type of plant plays a role, but also the size of the plant, the size of the pot and the environment in which the plant grows.

How can you make sure plants get enough water?

To ensure that plants get enough water, irrigation is often used in plant cultivation. This involves giving water to plants in a controlled way. This can be done in different ways, such as through drip irrigation, sprinkling or using an irrigation system.

Drip irrigation is a way of irrigation where water is given to the plants through small holes in the hose or tube, drop by drop. This method of irrigation is very efficient and ensures that the water reaches the roots of the plant directly. As a result, no water is lost and the plants receive just enough water.

Sprinkler irrigation is a method of irrigation that uses a sprinkler to deliver water to the plants. This is a less efficient method of irrigation because a lot of water is lost through the sprinkler. In addition, irrigation can cause damage to the plants because the water can damage the leaves.

An irrigation system is a method of irrigation in which water is given to the plants through pipes and hoses. This system can be very efficient because the water gets directly to the roots of the plant. In addition, the irrigation system can be programmed so that the water is given at set times and the plants always get enough water.

Conclusion

Water is an essential element for plants, so in plant cultivation it is very important to ensure that sufficient water is available for the plants. By using irrigation, it can be ensured that the plants get enough water.

...Read more
125 ProductsPage 4 of 6
PE Ball valve 1"
    The PE Ball Valve 1" can be placed in your irrigation system to seal the pipes.

    Available in: Multiple Connections....
    Gardena Gardena Premium Spray Lance
      The 90 cm long Gardena Premium Spray lance is suitable for watering larger areas with plants. Different types of jets can be selected. For example, ch...
      Blumat Loose sensor with hose and tee for the Blumatset
        Loose sensor with hose and tee for the Blumaset...
        AquaKing Water barrel valve
          Universal valve for water reservoir. Easy to assemble 100% waterproof....
          Geka Geka Coupling Female Thread
            The Geka Brass Coupling Male Thread allows you to easily connect a water hose to a connection with a female thread.

            Available in: 1/2" | 3/4" | 1"....
            AquaKing Aquaking Waterton Round
              With the Aquaking Waterton Round you have a very sturdy water tank that comes complete with lid.

              Available in: 50 liters | 70 liters | 100 liters |...
              Autopot AutoPot FlexiTank Pro
                With the AutoPot FlexiTank Pro, you have an extremely strong foldable water barrel.

                Available in: 100 liters | 225 liters | 400 liters....
                Nedco Nedco electronic water stopper
                  The Nedco water stop protects against water nuisance in rooms where a washing machine, dishwasher or other appliances are connected to the water suppl...
                  Gardena Gardena Spiral Hose Set 10m City Gardening
                    The Gardena Spiral Hose Set is the ideal solution for watering plants on a balcony, patio or small garden. After use, the garden hose automatically sh...
                    Gardena Gardena Sprayer with Extension
                      With the Gardena Sprayer with Extension, you can water the garden gently and in a targeted manner. The water flow can be shut off. Watering can be do...
                      GroLab GroLab Level sensor
                        A level sensor is a device used to detect the liquid level in a tank. The switch can control a pump, an indicator, an alarm or other device....
                        AquaKing Hose Clamp
                          Hose clamp allows you to easily attach your water hose to a coupling.

                          Available in: 1/2" | 3/4" | 1"....
                          Geka Geka Brass blind cap
                            With the Geka Brass Blind Cap you have a sealing cap to match your Geka Couplings....
                            PE Wall Clamp 25mm
                              PE terminal for wall mounting of PE hose flat surfaces....
                              PE T-connection 25mm
                                With the PE T-connection 25mm you can easily create a T-junction in your drip system....
                                AquaKing AquakingFlex Water Hose 1/2"
                                  With the AquakingFlex Water Hose 1/2" you have a sturdy 1/2 inch water hose of very high quality.

                                  Available in: Per Meter | 25 meter roll | 50 mete...
                                  Sicce Sicce Ultra Zero
                                    The Sicce ULTRA ZERO is a submersible pump designed for pumping turbid water without large dirt particles with a capacity of 3000 liters per hour...
                                    AquaKing Aquaking Fogger - 5ltr
                                      The Aquaking Fogger is ideal for the quick, simple and precise spraying of all kinds of liquids. With its powerful 1000 watt motor and large storage t...
                                      Blumat Blumat Flat
                                      Blumat Flat
                                      €30,89
                                        The Blumat Flat is the perfect solution for automatically watering plants on small grow tables or watering bowls. This flat Blumat sensor ensures that...
                                        Hozelock Hozelock SuperHoze
                                          With the Hozelock SuperHoze you have an extendable water hose including fittings that after use again assumes its original size.

                                          Available in: 7.5 ...
                                          Geka Geka Coupling Female Thread
                                            With the Geka Brass Coupling Female Thread you can easily connect a water hose to a connection with a male thread.

                                            Available in: 1/2" | 3/4" | 1"....
                                            Autopot Universal valve for Watertanks
                                              With the Universal Tap for Water Barrels, you have a tap that you can apply to any type of water barrel except the FlexiTank's....
                                              AquaKing Aquaking Ray-Jet Nozzle Set 10 pieces
                                                With the Aquaking Ray-Jet Sprayer Set you have a complete dripper that you can connect directly to your PE hose (tyleen)....
                                                AquaKing Aquaking CNL Plug 45°
                                                  With the Aquaking CNL Plug 45° you have a ground plug that is used in combination with a CNL hose and or CNL pressure valves....

                                                  Water and irrigation in plant cultivation

                                                  Water is an essential element for all crops. It transports nutrients and allows plants to grow and reproduce. Therefore, in plant cultivation, it is very important to have sufficient water available for the crop. But how much water do plants actually need and how can you ensure that plants get enough water?

                                                  How much water do your plants need?

                                                  The amount of water plants need depends on several factors. For example, the type of plant plays a role, but also the size of the plant, the size of the pot and the environment in which the plant grows.

                                                  How can you make sure plants get enough water?

                                                  To ensure that plants get enough water, irrigation is often used in plant cultivation. This involves giving water to plants in a controlled way. This can be done in different ways, such as through drip irrigation, sprinkling or using an irrigation system.

                                                  Drip irrigation is a way of irrigation where water is given to the plants through small holes in the hose or tube, drop by drop. This method of irrigation is very efficient and ensures that the water reaches the roots of the plant directly. As a result, no water is lost and the plants receive just enough water.

                                                  Sprinkler irrigation is a method of irrigation that uses a sprinkler to deliver water to the plants. This is a less efficient method of irrigation because a lot of water is lost through the sprinkler. In addition, irrigation can cause damage to the plants because the water can damage the leaves.

                                                  An irrigation system is a method of irrigation in which water is given to the plants through pipes and hoses. This system can be very efficient because the water gets directly to the roots of the plant. In addition, the irrigation system can be programmed so that the water is given at set times and the plants always get enough water.

                                                  Conclusion

                                                  Water is an essential element for plants, so in plant cultivation it is very important to ensure that sufficient water is available for the plants. By using irrigation, it can be ensured that the plants get enough water.