Irrigation system & water treatment

Water and irrigation in plant cultivation

Water is an essential element for all crops. It transports nutrients and allows plants to grow and reproduce. Therefore, in plant cultivation, it is very important to have sufficient water available for the crop. But how much water do plants actually need and how can you ensure that plants get enough water?

How much water do your plants need?

The amount of water plants need depends on several factors. For example, the type of plant plays a role, but also the size of the plant, the size of the pot and the environment in which the plant grows.

How can you make sure plants get enough water?

To ensure that plants get enough water, irrigation is often used in plant cultivation. This involves giving water to plants in a controlled way. This can be done in different ways, such as through drip irrigation, sprinkling or using an irrigation system.

Drip irrigation is a way of irrigation where water is given to the plants through small holes in the hose or tube, drop by drop. This method of irrigation is very efficient and ensures that the water reaches the roots of the plant directly. As a result, no water is lost and the plants receive just enough water.

Sprinkler irrigation is a method of irrigation that uses a sprinkler to deliver water to the plants. This is a less efficient method of irrigation because a lot of water is lost through the sprinkler. In addition, irrigation can cause damage to the plants because the water can damage the leaves.

An irrigation system is a method of irrigation in which water is given to the plants through pipes and hoses. This system can be very efficient because the water gets directly to the roots of the plant. In addition, the irrigation system can be programmed so that the water is given at set times and the plants always get enough water.

Conclusion

Water is an essential element for plants, so in plant cultivation it is very important to ensure that sufficient water is available for the plants. By using irrigation, it can be ensured that the plants get enough water.

...Read more

Water and irrigation in plant cultivation

Water is an essential element for all crops. It transports nutrients and allows plants to grow and reproduce. Therefore, in plant cultivation, it is very important to have sufficient water available for the crop. But how much water do plants actually need and how can you ensure that plants get enough water?

How much water do your plants need?

The amount of water plants need depends on several factors. For example, the type of plant plays a role, but also the size of the plant, the size of the pot and the environment in which the plant grows.

How can you make sure plants get enough water?

To ensure that plants get enough water, irrigation is often used in plant cultivation. This involves giving water to plants in a controlled way. This can be done in different ways, such as through drip irrigation, sprinkling or using an irrigation system.

Drip irrigation is a way of irrigation where water is given to the plants through small holes in the hose or tube, drop by drop. This method of irrigation is very efficient and ensures that the water reaches the roots of the plant directly. As a result, no water is lost and the plants receive just enough water.

Sprinkler irrigation is a method of irrigation that uses a sprinkler to deliver water to the plants. This is a less efficient method of irrigation because a lot of water is lost through the sprinkler. In addition, irrigation can cause damage to the plants because the water can damage the leaves.

An irrigation system is a method of irrigation in which water is given to the plants through pipes and hoses. This system can be very efficient because the water gets directly to the roots of the plant. In addition, the irrigation system can be programmed so that the water is given at set times and the plants always get enough water.

Conclusion

Water is an essential element for plants, so in plant cultivation it is very important to ensure that sufficient water is available for the plants. By using irrigation, it can be ensured that the plants get enough water.

...Read more
125 ProductsPage 5 of 6
Gardena Gardena Premium Spray Lance
    The 90 cm long Gardena Premium Spray lance is suitable for watering larger areas with plants. Different types of jets can be selected. For example, ch...
    Gardena Gardena Prof-System Garden Sprayer
      The Gardena Prof-System Garden Sprayer is ideal in connection with longer hoses or for use with pumps. It serves as a connection to the Prof-System. T...
      GroLab GroLab Flood detector
        Flood sensor for Grolab that detects water excess and leaks. It is able to provide your grow with flood prevention and detection....
        Blumat Blumat sensor maxi
          Blumat sensor maxi 15-18cm...
          AquaKing Hose Clamp
            Hose clamp allows you to easily attach your water hose to a coupling.

            Available in: 1/2" | 3/4" | 1"....
            AquaKing Aquaking Knee for Ray-jet 10 Pieces
            -33%
              With the Aquaking Knee for Ray-jet you can easily connect your cobra hose to a Ray-jet nozzle....
              PE Transition 25mm ~ 1" Female/Male Thread
                The PE Transition 25mm ~ 1" Female/Male Thread allows you to easily connect your PE hose, or tylene hose, to fittings.

                Available in: Female & Male ...
                AquaKing Water barrel valve
                  Universal valve for water reservoir. Easy to assemble 100% waterproof....
                  TWC TWC Electric Pressure Sprayer 6 liters incl. Lance
                    With the TWC Electric Pressure Sprayer 6 liters incl. Lance you have a pressure sprayer equipped with a 12V Li-on battery and an aluminum lance with a...
                    Blumat Blumat Corer
                      The Blumat Corer is an indispensable tool for easy and quick cutting of both the Blumat Digital Tensiometer and the Blumat Tropf Maxi. With this corer...
                      Astore Astore Transition Female thread 25mm - 3/4 inch
                      -38%
                        The Astore Transition Female Thread 25mm - 3/4 inch allows you to easily connect an appendage to your irrigation system....
                        Astore Astore T-piece female thread 25mm - 1 inch
                        -41%
                          With the Astore T-piece Internal thread 25mm - 1 inch you can easily make a branch in your irrigation system to connect an fitting....
                          GrowMaxWater GrowMax Osmosis Membrane ~ GrowMax 3000 Membrane
                            With the GrowMax Osmosis Membrane you have an osmosis membrane for the GrowMax 3000....
                            GrowMaxWater GrowMax Replacement Filters Set ~ PowerGrow & MegaGrow
                              With the GrowMax Replacement Filters Set, you can easily replace your filters from your PowerGrow or MegaGrow system....
                              Blumat Blumat Drip Hose 3mm 100 meters
                                The Blumat Drip Hose 3mm 100 meters allows you to customize the drip hose for your drip system....
                                AquaKing Aquaking Water spider
                                  With a water spider you can complete your drip system and water 4 pots equally.

                                  Available in: 45° Plug | 90° Plug | Straight Plug....
                                  Gardena Gardena Watertimer
                                    The Gardena Watertimer is connected to the tap and controls the automatic watering of your garden, for example with sprinklers or a drip system such a...
                                    Blumat Blumat strut for dripper
                                      With the Blumat strut for dripper you can anchor your divider or 8mm hose in the ground....
                                      AquaKing Aquaking Ray-Jet Nozzle Set 10 pieces
                                        With the Aquaking Ray-Jet Sprayer Set you have a complete dripper that you can connect directly to your PE hose (tyleen)....
                                        Blumat Blumat Cover
                                          This small but important tool serves as a locking cap for the adjusting screw of the dripper, keeping it in the right place for optimal operation of y...
                                          Blumat Blumat Sealing Cap
                                            The Blumat sealing cap is used to seal t-pieces, Ø3mm pipes, end or knee fittings....
                                            Hozelock Hozelock SuperHoze
                                              With the Hozelock SuperHoze you have an extendable water hose including fittings that after use again assumes its original size.

                                              Available in: 7.5 ...
                                              GrowMaxWater GrowMax carbon filter for GrowMax 3000
                                                The GrowMax Carbon Filter gives you a replacement carbon filter for your GrowMax 3000 osmosis system....
                                                PE Ball valve 1"
                                                  The PE Ball Valve 1" can be placed in your irrigation system to seal the pipes.

                                                  Available in: Multiple Connections....

                                                  Water and irrigation in plant cultivation

                                                  Water is an essential element for all crops. It transports nutrients and allows plants to grow and reproduce. Therefore, in plant cultivation, it is very important to have sufficient water available for the crop. But how much water do plants actually need and how can you ensure that plants get enough water?

                                                  How much water do your plants need?

                                                  The amount of water plants need depends on several factors. For example, the type of plant plays a role, but also the size of the plant, the size of the pot and the environment in which the plant grows.

                                                  How can you make sure plants get enough water?

                                                  To ensure that plants get enough water, irrigation is often used in plant cultivation. This involves giving water to plants in a controlled way. This can be done in different ways, such as through drip irrigation, sprinkling or using an irrigation system.

                                                  Drip irrigation is a way of irrigation where water is given to the plants through small holes in the hose or tube, drop by drop. This method of irrigation is very efficient and ensures that the water reaches the roots of the plant directly. As a result, no water is lost and the plants receive just enough water.

                                                  Sprinkler irrigation is a method of irrigation that uses a sprinkler to deliver water to the plants. This is a less efficient method of irrigation because a lot of water is lost through the sprinkler. In addition, irrigation can cause damage to the plants because the water can damage the leaves.

                                                  An irrigation system is a method of irrigation in which water is given to the plants through pipes and hoses. This system can be very efficient because the water gets directly to the roots of the plant. In addition, the irrigation system can be programmed so that the water is given at set times and the plants always get enough water.

                                                  Conclusion

                                                  Water is an essential element for plants, so in plant cultivation it is very important to ensure that sufficient water is available for the plants. By using irrigation, it can be ensured that the plants get enough water.