- EAN: 5060560031185
- Article number: a146080
| High quality LED horticultural lighting
Lumatek Zeus 1000W Xtreme PPFD CO2 LED is a linear fixture with multiple light bars that produces extremely high PPF levels of 2925 µmol/s and very high efficiencies up to 2.9 umol/J.
The efficiency of the fixture varies depending on the input voltage used.
High Light Intensity, High Efficiency
With advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option that offers a significant return on investment to growers. Lumatek full spectrum horticulture LED solutions balance light quality (spectra) with light quantity (intensity and duration) ensuring even light distribution and uniform dispersion.
The Zeus 1000W Xtreme PPFD CO2 produces extremely high levels of light intensity that require the use of additional CO2 for those planning to grow on 1.5×1.5m grow rooms with short distances from the canopy to the lamp.
Carbon dioxide (CO2) addition.
The use of CO2 with this fixture is not mandatory, but to use it without it, a greater distance from the canopy to the light is advised, to ensure the optimal PPFD levels according to the growth stage. With the latter method, the expected optimal coverage area becomes 1.8 × 1.8 m, but with lower levels of PPFD intensity concentration.
The use of carbon dioxide (CO2) in your controlled environment can significantly improve the yield of your crop if used correctly. In general, a good rule is:
Once you exceed 1000 µmol/s/m2 PPFD levels should be 1:1 with CO2 PPM - up to 1500. So at max PPFD = 1500 µmol/s/m2, CO2 would be 1500 PPM (slightly lower, 1400 PPM might be safest to start with).
Osram & Philips
The Zeus is built using the high quality Lumatek driver and LEDs with the highest BIN value from Osram and Lumileds Philips. Another new feature of this line is the Clear Glue protective cover technology on the LED bars; this results in higher light transmission of 99% without loss of light, longer diodes life, additional corrosion resistance and a high waterproof rating of IP65. For basic maintenance, simply clean the bars with wet cotton.
For different cultivars, propagation and vegetative growth periods, the Zeus can be dimmed without loss of efficiency. The highly efficient and energy efficient LED configuration with 10 LED bars lowers the temperature of the LEDs, increasing the output and making the light last longer.
The Zeus fixture can also be controlled externally with a Lumatek digital panel or any other control system that uses a 0-10V output signal. With automatic dimming, temperature safety control, Sunrise & Sunset mode for up to 100 fixtures per controller. Even if your universal controller has an RJ port interface, you can still control the LEDs using a signal converter RJ to 0-10V control adapter.
- Very high efficiency 2.9 µmol/J;
- High PPF output for high intensity 2925 µmol/s;
- High quality Lumatek LED drivers;
- Designed to deliver utra-high PPFD for CO2-enriched grow rooms;
- CO2 enrichment: Once a PPFD of 1000 µmol/s/m2 is exceeded, a ratio of 1:1 CO2 PPM should be
- New Clear Glue protective cover technology on LED bars;
- Only "top bin" LEDs to ensure the very highest quality;
- Balanced full spectrum;
- Remote control with Lumatek Control Panel Plus 2.0;
- Replaceable 100W Pro 2.9 magnetic light bars;
- Fully dimmable;
- User-friendly Plug & Play assembly;
- Detachable driver for remote operation.
- Efficiency: 2.9 µmol/J;
- PPF: 2925 µmol/s;
- Input voltage: 200-240V, 50-60Hz;
- Power consumption: 1025W;
- Recommended surface area:
- With additional CO2 added: 1.5 x 1.5 m;
- Without supplemental CO2: 1.8 x 1.8 m.
- CO2 enrichment: 1:1 ratio CO2 PPM should be applied once a PPFD of 1000 μmol/s/m2 is exceeded;
- Protection class: IP65;
- Service life: 60,000 hours;
- Light distribution: 120°;
- LEDs: 4000K White Diodes Lumileds 3030 HE Plus and
660nm Red Diodes Osram SQ3.24;
- CTT: 3800K;
- Number of LED bars: 10 pcs;
- Number of LEDs per bar: 280 white and 24 red;
- Diode ratio in PPFD: red 18%, white 82%;
- Diode efficiency:
- White Lumileds 3030 HE Plus 2.9 μmol/J;
- Red Osram SQ3.24 3.8 μmol/J.
- Dimmable: OFF, 25%, 50%, 75%, 100% with 0-10V light dimmer (included);
- Thermal Management: Passive;
- Power factor: > 0.95;
- Max. ambient temperature at 100% power: 25°C;
- Heat output in BTU:
- With driver mounted on fixture: 3497;
- With driver mounted externally: 3180.
- Location of driver: fixed in structure or removable for remote use (extension cords sold separately);
- Remote control: with Lumatek Digital Panel Plus 2.0 (Maximum of 100 fixtures);
- Weight: 18 kg;
- Dimensions: 1181.2 x 1091 x 105.7 mm;
- Spectrum: Full spectrum;
- 10 x Lumatek 100W Pro 2.9 full spectrum magnetic light bars
- 1 x Lumatek 1000W Xtreme Pro Driver with connecting cables
- 1 x LED Structure with Cables
- 1 x 0-10V Light Dimmer + Velcro
- 2 x Metal Cable Hangers